Water Damage Restoration – What Exactly Is It? It is the process of repairing a house or property to its pre loss condition. Damage to the property could be as a result of an overflow, flood or any other water damage event. The water damage restoration process involves several key procedures like loss assessment, categorization based on the water contamination levels, decontaminating and drying the structure, monitoring of the process and completion of the process. There are 2 large certifying bodies, namely the IICRC (Institute of Inspection, Cleaning and Restoration Certification) and the RIA (Restoration Industry Association) that recommends standards for water damage restoration. The S500 damage as a result of water guide is the benchmark tool that is utilized by companies focusing on restoration of water damage.
Loss Assessment and Categorization – Loss evaluation is the foremost and the most significant element of water damage restoration. The assessment must be correct in order that the right response can be utilized. In restorating the damage due to water, technicians and the insurance companies must work together and know what is damaged and the way to restoring the harm. Identifying the origin in the damage, documentation of damage, and accurate estimates are mandatory for any proper water damage and mold restoration. Categorization is situated on the contamination amounts of the water source. The categories are highlighted below
Category 1 – This is water from clean sources like pipes, sinks and toilets without faeces or urine.
Category 2 – This can be water which includes some contaminants like water from the dishwasher, washer or toilet with urine.
Category 3 – This is water that is highly unsanitary and is capable of doing causing illness or death if ingested. Sewage water, water from toilet with faeces, standing water with microbial growth and floodwater are some examples.
Decontamination and Drying – Right after the evaluation is complete, the process of drying and decontaminating begins at the site. Based on the extent of damage, damage caused due to water can be classified into 4 types. Class 1 Damage- When loss is fixed to your small area and less water has been absorbed by materials. This brings about slow evaporation rate. Class 2 Damage – When the damage would be to the entire room and carpet area. Class 3 Damage – When the entire area is saturated with water and sophistication 4 Damage – when there are numerous deep saturation pockets. Decontamination and drying is actually a key stage in Water damage and mold restoration and equipments like blowers, dehumidifiers, scrubbers and subfloor drying equipments must be used. Decontamination must be done if contamination continues to be detected in the area. Decontamination may be completed for the entire area or even in specific pockets where contamination has been detected.
Monitoring and Completion – Monitoring the restoration process of damage caused due to damage is crucial to obtain the desired results. One has to be proactive throughout the monitoring process. Checking if the drying equipment is setup properly, assessing when the personnel involved are qualified for the job and checking if the equipments will be in working order inwtsy all area of the monitoring process. Necessary steps should be taken if anything wrong is spotted throughout the monitoring process. The complete procedure for water damage and mold restoration could be classified as complete just once the humidity, temperature and also the moisture content is really as per industry standards. Upon finishing of the water damage restoration process, the drying equipment can be removed.